Carburetor Workbench Tip

7 Flares Facebook 3 Twitter 3 Google+ 1 Pin It Share 0 7 Flares ×
Print Friendly, PDF & Email
Carburetor Workbench Tip

When working on your carburetor…

carb-standTransfer the carburetor from the engine to a clean, open workbench. If you don’t have a carb stand, simply slide four bolts of your choice through the mounting holes in the bottom plate, and “nut” them up at the top. All you need is enough clearance for the levers and protruding linkage.

Speak Your Mind

*

7 Flares Facebook 3 Twitter 3 Google+ 1 Pin It Share 0 7 Flares ×