Crankshaft Removal Tip

9 Flares Facebook 4 Twitter 3 Google+ 2 Pin It Share 0 9 Flares ×
Print Friendly, PDF & Email
Crankshaft Removal Tip

If you plan on removing your crankshaft while leaving the rod and piston assemblies in the bores, attach a rubber band to a bolt on each rod and to a reinstalled oil pan bolt. This will keep the rods off to the side and from banging into the block when pulling the crank out.

crankshaft-removal

Shop for Corvette parts at www.EcklersCorvette.com

Follow us on our Corvette Facebook page. Click here and Like us!

Speak Your Mind

*

9 Flares Facebook 4 Twitter 3 Google+ 2 Pin It Share 0 9 Flares ×